Dalsa Pantera DS-21-01M60, User'S Manual And Reference

Page: 13 / 62

Pantera 1M60 and 1M30 User’s Manual 13
DALSA 03-032-10033-09
Data Connector
Figure 7: MDR26 Connector
MD R26 Female
1
14
13
26
M at ing Par t : 3M 334-31 ser ies
C able: 3M 14X 26-SZ LB-X X X -0LC * *
Table 4: MDR26 Connector Reference
Item Value Item Value
Pinout BASE Pinout BASE
1 GND 14 GND
2 X0- 15 X0+
3 X1- 16 X1+
4 X2- 17 X2+
5 Xclk- 18 Xclk+
6 X3- 19 X3+
7 SERTC+ 20 SERTC-
8 SERTFG- 21
9 CC1- 22 CC1+
10 CC2+ 23 CC2-
11 CC3- 24 CC3+
12 CC4+ 25 CC4-
13 GND 26 GND
Notes:
*Exterior Overshield is connected to the shells of the connectors on both ends.
**3M part 14X26-SZLB-XXX-0LC is a complete cable assembly, including connectors.
Unused pairs should be terminated in 100 ohms at both ends of the cable.
Table 5: DALSA Camera Control Configuration
Signal Configuration
CC1 EXSYNC
CC2
Spare
CC3 Spare
CC4
Spare
Digital Data
The camera digitizes internally to 12 bits and has a user selectable output of 8, 10, or 12
bits in LVDS format on the Camera Link connector. You can select the output using the
oms
command. For details, see section 3.5 Setting the Data Mode.