12
•
Linea2 5GigE Series Overview
Linea2 5GigE Series Camera
Power over Ethernet (PoE) Support
•
Linea2 requires PoE Class 0 or Class 2 (or greater) power source for the network if not using a
separate external power source connected to pins 10 & 15
of the camera’s I/O Connector.
•
To use PoE, the camera network setup requires a powered computer NIC supporting PoE, or
PoE capable Ethernet switch, or an Ethernet power injector.
Important:
Connect power via the I/O or PoE,
not both
. Although Linea2 has
protection, differences in ground levels may cause operational issues or electrical
faults. If both supplies are connected and active, the Linea2 will use the I/O power
supply connector.
•
Important:
When using PoE, the camera’s I/O pin 1
0 (Camera Power
–
Ground) must not be
connected to I/O pin 5 (Signals Ground).
