Linea2 5GigE Series Camera
Operational Reference
•
115
GigE Vision Host Control Category
The GigE Vision Host Controls category group parameters used to configure the host computer
system GigE Vision features used for Linea2 5GigE networking management.
None of these
parameters are stored in any Linea2 5GigE camera.
These features allow optimizing the network configuration for maximum bandwidth. Settings for
these parameters are highly dependent on the number of cameras connected to a NIC, the data
rate of each camera and the trigger modes used.
Information on these features is found in the Teledyne DALSA Network Imaging Module User
manual.
