58
Appendix A: GenICam Commands
Test Pattern
TestImageSelector
Selects the type of test image that is sent
by the camera.
1.00
Beginner
DFNC
Off
Off
Selects sensor video to be output
Each Tap Fixed
Grey Horizontal Ramp
Each Tap Fixed
Grey Horizontal Ramp
Selects a grey scale value that is
increased every 512 pixels.
Selects a grey scale ramp
Grey Vertical Ramp
Grey Vertical Ramp
Selects a grey scale ramp progressively
for each row.
Grey Diagonal Ramp
Grey Diagonal Ramp
Selects a combination of horizontal and
vertical raps to form a diagonal grey
scale.
User Pattern
User Pattern
User can define a test pattern by
uploading to the camera a PRNU file
using the FileAccess > Miscellaneous >
User PRNU feature. The PRNU
coefficient will be applied to a midscale
(128DN) test image.
Contact Teledyne DALSA support for an
Excel file that can help with this.
AOI Count
multipleROICount
Specified the number of AOI’s in an
acquired image
1.00
Beginner
SFNC
AOI Selector
multipleROISelector
Select 1 of up to 4 AOI’s when setting
the AOI Offset & AOI Width
1.00
Beginner
SFNC
AOI Offset
multipleROIOffsetX
Location of the start of a single Area of
Interest to be output. Multiple of 32.
1.00
Beginner
AOI Width
multipleROIWidth
Width of the start of a single Area of
Interest to be output
Minimum is 96 per lane. e.g., if there is
only one AOI spread across the 5 lanes
then the minimum is 5 x 96 = 480.
Maximum of the sum of AOI width’s is the
sensor width. e.g., for a 16k sensor, if
there are two AOI’s with the first 12k
wide, then the second can be no wider
than 4k.
1.00
Beginner
Input Pixel Size
pixelSizeInput
Size of the image input pixels, in bits per
pixel. (RO)
1.00
DFNC
Invisible
12 Bits/Pixel
Bpp12
Sensor input data path is 12
Transport Layer Control Category
Note: All features shown in Guru visibility.
Summary of Contents for Linea HS HL-FM-08K30H-00-R
Page 5: ...The Linea HS Monochrome Cameras 5 DECLARATION OF CONFORMITY 73 DOCUMENT REVISION HISTORY 74 ...
Page 15: ...The Linea HS Monochrome Cameras 15 Figure 4 HL HM 16K30H 00 R Mechanical Drawing ...
Page 26: ...26 Camera Performance and Features Figure 7 Image with incorrect scan direction ...
Page 73: ...Declaration of Conformity 73 Declaration of Conformity ...