Dalsa Genie Nano-CXP Series, User Manual

Page: 21 / 107

Genie Nano-CXP Series™ Nano-CXP Installation
•
19
LED Indicators
The Genie Nano-CXP has one multicolor LED to provide a simple visible indication of camera state,
as described below. The CoaXPress link connectors do not have any status LED indicators.
Camera Status LED Indicator
The camera is equipped with one LED to display its operational status. When more than one
condition is active, the LED color indicates the condition with the highest priority. The following
table summarizes the LED states.
LED State Definition
LED is off No power to the camera
Steady Blue Initial state on power up before flashing.
Steady Orange Camera initialization sequence in progress.
Steady Green Device / Host connected, but no data being transferred.
Flashing Green Acquisition in progress. Flashing occurs on frame acquisition.
Note that flashing rate is constant – irrelevant of the frame rate.
Fast Flashing Blue File Access Feature is transferring data such as a firmware update, etc.
Fast Flashing Red System error (e.g. internal error).