Dalsa Genie HC1024, User Manual

Page: 54 / 141

52

Operational Reference Genie HM-HC Series-GigE Vision Camera
Reset Mode

Exposure starts immediately after a valid trigger. There is no jitter on the start of exposure.

Exposure time is programmable or controlled by the trigger pulse width.

Minimum exposure is 10µs – maximum is 4 seconds, with steps of 1µs.

Sensor readout must complete before the next exposure can start. That is, exposure and readout are sequential.
Therefore, the maximum frame rate is lower than for Synchronous mode.

Any external trigger received before the previous exposure/read out sequence is complete is ignored. An
application can elect to receive messages about ignored triggers. See
" Events " on page 71 .
Reset Mode Timing example for Genie
Synchronization Mode via Sapera LT or GigE Vision Compliant
Applications
Sapera
Genie Sapera parameters for Synchronization Mode:
ExposureAlignment = {Synchronous = 0, Reset = 1}
In CamExpert, these parameters are available under the “Sensor” tab in the “Exposure Control”
dialog box.
See "Accessing Features with + LT
" on page 76 .
XML features for Synchronization Mode:
ExposureAlignment = {Synchronous = 0, Reset = 1}