20
Falcon2 4M, 8M, and 12M Camera User's Manual
03-032-20107-03
Teledyne DALSA
!
Power Connector
WARN IN G:
It is extrem ely im p ortant that you ap p ly the ap p rop riate voltages to you r cam era.
Incorrect voltages m ay d am age the cam era. Inp u t voltage requ irem ent: +12 VDC to +24 VDC
(± 5 %), 2 Am p s. Before connecting p ow er to the cam era, test all p ow er su p p lies.
Figure 7: 12-pin Hirose Circular Male Power Plug—Power Connector
Table 6. Power Plug Pinout
Pin
Description
Pin
Description
1
GN D
7
OUT1_C1/ Strobe_C1
2
+12 V to +24 V DC
8
OUT1_C0/ Strobe_C0
3
OUT0_C1
9
GN D
4
OUT0_C2
10
+12 V to +24 V DC
5
IN 1-
11
IN 2+/ Trigger
6
IN 1+
12
IN 2-/ Trigger
WARNING: When setting up the camera’s power supplies follow these guidelines:
Ap p ly the ap p rop riate voltages.
Protect the cam era w ith a 2 am p slow -blow fu se betw een the p ow er su p p ly and the cam era.
Do not u se the shield on a m u lti-cond u ctor cable for grou nd .
Keep lead s as short as p ossible in ord er to red u ce voltage d rop .
Use high-qu ality linear su p p lies in ord er to m inim ize noise.
Note:
If your power supply does not meet these requirements, then the camera performance specifications are not
guaranteed.
1
2
3
4
5
6
7
8
9
10
11
12
!