82
•
Technical Specifications
Xtium2-CXP PX8 User's Manual
Connector and Switch Specifications
Xtium2-CXP PX8 End Bracket Detail
Figure 27: End Bracket Details
The hardware installation process is completed with the connection of a supported camera to the
Xtium2-CXP PX8 board using an HDBNC connector (12G models) or DIN 1.0/2.3 connector
(6G model). (See the CoaXPress Cables section).
The Xtium2-CXP PX8 board supports up to 4 CoaXPress camera outputs.
•
1CH Model
•
One Camera connection:
•
Connect the camera to the C1 connector.
•
2CH Model
•
One Camera connection:
•
Connect the camera to the C1 and C2 connectors. The order that the cables are
connected to the camera does not matter.
•
Two Camera connection:
•
Connect Camera #1 to C1 and Camera #2 to C2.
•
4CH Model
•
One Camera connection:
•
Connect the camera to the C1, C2, C3 and C4 connectors. The order that the cables are
connected to the camera does not matter.
•
Two Camera connection:
•
Connect Camera #1 to C1/C2 and Camera #2 to C3/C4. The order that the cables are
connected to the camera does not matter.
•
Three Camera connection:
•
Connect Camera #1 to C1, Camera #2 to C2 and Camera #3 to C3/C4. The order that
the cables are connected to the camera #3 does not matter.
•
Four Camera connection:
•
Connect Camera #1 to C1, Camera #2 to C2, Camera #3 to C3 and Camera #4 to C4.
