Xtium2-CL MX4 User's Manual
Xtium2-CL MX4 Reference
•
73
Xtium2-CL MX4 Supported Parameters
The tables below describe the Sapera capabilities supported by the Xtium2-CL MX4. Unless
specified, each capability applies to all configuration modes and all acquisition modes.
The information here is subject to change. The application needs to verify
capabilities. New board driver releases may change product specifications.
Sapera describes the Xtium2-CL MX4 family as:
•
Board Server
: Xtium2-CL_MX4_1
•
Acquisition Module
:
dependent on firmware used
Camera Related Capabilities
Capability
Values
CORACQ_CAP_CONNECTOR_TYPE
CORACQ_VAL_CONNECTOR_TYPE_CAMLINK (0x2)
CORACQ_CAP_CONNECTOR_CAMLINK
(Pin
–
01, Pin
–
02, Pin
–
03, Pin - 04)
CORACQ_VAL_SIGNAL_NAME_NO_CONNECT (0x1)
CORACQ_VAL_SIGNAL_NAME_PULSE0 (0x8)
CORACQ_VAL_SIGNAL_NAME_PULSE1 (0x10)
CORACQ_VAL_SIGNAL_NAME_EXT_TRIGGER (0x200)
CORACQ_VAL_SIGNAL_NAME_EXT_TRIGGER_1 (0x400000)
CORACQ_VAL_SIGNAL_NAME_EXT_TRIGGER_2 (0x200000)
CORACQ_VAL_SIGNAL_NAME_SHAFT_ENCODER_PHASE_A (0x40000)
CORACQ_VAL_SIGNAL_NAME_SHAFT_ENCODER_PHASE B (0x80000)
CORACQ_VAL_SIGNAL_NAME_EXT_LINE_TRIGGER_1 (0x400000)
CORACQ_VAL_SIGNAL_NAME_EXT_LINE_TRIGGER_2 (0x100000)
