18
•
Linea Lite GigE Camera Quick Start
Linea Lite GigE Series Camera
Linea Lite GigE Camera Quick
Start
Sapera Software Installation
Note:
Installation of Sapera LT and the GigE Vision package requires administrative
privileges; logon to the workstation as an administrator or with an account that has
administrator privileges.
When Linea Lite GigE is used in a
Sapera development environment
with
Sapera LT 8.0
or
later, all GigE Vision support for cameras is automatically installed.
If no Sapera development is required then the Sapera LT SDK is not needed to control the Linea
Lite GigE camera; Sapera runtime with CamExpert provides everything to control the camera.
If Linea Lite GigE will be used in a
third party GigE Vision Compliant environment
, Sapera or
Sapera runtime is not required; follow the installation instructions of the third party package.
Procedure
•
Download and install Sapera 8.50 which automatically provides GigE Vision support. When
installing, select the installation for GigE Vision support.
http://www.teledynedalsa.com/imaging/support/downloads/sdks/
Refer to
Sapera LT User’s Manual
concerning application development with Sapera.
Note
: The Teledyne DALSA Sapera CamExpert tool (used throughout this manual to
describe Linea Lite GigE Vision features) is installed with either the Sapera LT runtime
or the Sapera LT development package. If Sapera application development is required,
install Sapera (8.00 or later for all firmware support) as described in the previous
section.
Preliminary
