Linea Lite GigE Series Camera
Linea Lite GigE Series Overview
•
11
Sensor Performance:
The sensor description below provides a specification table and response graphics. The graph
describes the sensor response to different wavelengths of light (excluding lens and light source
characteristics). Visible light spans wavelengths between about 390 - 780 nm. Wavelengths below
390 nm are termed ultra-violet while those above 780 nm are termed infra-red.
Sensor Specifications
Item / Feature
Specification
Camera Model
L2-GM-04K02B-00-A
Sensor Used
High speed CMOS line scan
Minimum Line Rate (internal acquisition)
300 Hz
Maximum Line Rate (internal acquisition)
64 kHz
Maximum Line Rate Output
System dependent on the GigE network
Exposure Control
5
μs to
2500
μ
s
Internal Trigger to Start of Exposure
~0.24
μ
s minimum (programmable exposure mode)
External Trigger to Start of Exposure
~0.30 μs minimum (programmable exposure mode)
~0.30
μs (pulse width controlled exposure mode)
Horizontal Line Time
15.6
μs
Readout Time
14.44
μs
Pixel Size
7 µm x 7 µm
Pixel Format
User selectable 8-bit or 12-bit
Output Dynamic Range
>68 dB (nominal gain)
Random Noise
<1.5 DN rms (FFC enabled)
DC Offset
7 DN
—
12-bit (FFC enabled)
PRNU
< 1.5% @ 50% Saturation
FPN
< 7 DN
SEE
30 nJ / cm
2
NEE
12 pJ / cm
2
Anti-blooming
> 100 x Saturation
Integral non-Linearity
1.5% DN
Test Conditions
•
Values measured using 12-bit, 1x gain
•
10 kHz line rate
•
Light source: broadband, quartz halogen, 3250 K with 700 nm IR cut-off filter
•
Front plate temperature: 45° C
Preliminary
