14
Calibir GXM640 Overview
Calibir GXM640 IR Camera User's Manual
GigE Vision Interface
Calibir GXM640 cameras comply with the GigE Vision and GenICam standard protocols.
GigE Vision Sapera Application Description
Calibir cameras are 100% compliant with the GigE Vision 1.1
specification which defines the communication interface protocol used
by any GigE Vision device. The device description and capabilities are
contained in an XML file. For more information see:
https://www.visiononline.org/vision-standards-details.cfm
Calibir cameras implement a superset of the GenICam™ specification
which defines device capabilities. This description takes the form of an
XML device description file respecting the syntax defined by the
GenApi module of the GenICam™ specification. For more information
see
The Teledyne DALSA GigE Vision Module provides a license free development platform
for Teledyne DALSA GigE hardware or Sapera vision applications. Additionally supported
are Sapera GigE Vision applications for third party hardware with the purchase of a GigE
Vision Module license, or the Sapera processing SDK with a valid license.
The GigE Vision Compliant XML device description file is embedded within Calibir
firmware allowing GigE Vision Compliant applications access to Calibir capabilities and
controls immediately after connection.
User’s Sapera
Application
Sapera LT SDK
GigE Vision
Module
GigE Server
Sapera Network
Imaging Driver
CamExpert
Ethernet Network Interface Card
Network
Configuration Tool
Images
Control
GVSP
GigE Vision
Stream
Protocol
GVCP
GigE Vision
Control
Protocol
single GigE Vision
Camera
Sapera LT
smart DHCP
Server
(optional)
Sapera Network
Imaging Module
Alternatively via a switch
To multiple GigE
Vision Cameras
Figure 1: GigE Application Architecture
