The information contained in this document is not subject to Export Control Regulation in Canada.
Calibir GXM640 IR Camera User's Manual
Operational Reference
117
User Set Control Category
The User Set Control category, as shown by CamExpert, allows users to select the power-
up configuration. In addition, CamExpert provides a dialog box, available through the
Power-up Configuration feature in the Camera Information category, which combines the
features to select the camera power-up state and for the user to save or load a Calibir
camera state: for more information refer to the Power-up Configuration Dialog section.
Figure 44: CamExpert User Set Control Category
User Set Control Feature Descriptions
The following table describes these parameters along with their view attribute.
Table 28: User Set Control Feature Descriptions
Display Name
Feature & Values
Description
View
Power-up
Configuration Selector
UserSetDefaultSelector
Selects the camera configuration set to load
and make active on camera power-up or
reset. The camera configuration sets are
stored in camera non-volatile memory. (RW)
Beginner
Factory Setting
Default Load factory default feature settings.
User Settings 1
UserSet1 Select the User Defined Configuration space
UserSet1 to save to or load from features
settings previously saved by the user.
User Settings 2
UserSet2 Select the User Defined Configuration space
UserSet2 to save to or load from features
settings previously saved by the user.
