Dalsa C1240 User Manual Download Page 20

Page: 20 / 327

•

Genie Nano Series Overview

Nano Series GigE Vision Camera

Software Requirements

Sapera LT Development Software

Teledyne DALSA Software Platform for Microsoft Windows

Sapera LT version 8.00 or later (8.10 or later recommended),

for Windows. Includes Sapera Network Imaging Package and

GigE Vision Imaging Driver, Sapera Runtime and CamExpert.

Provides everything you will need to develop imaging applications

Sapera documentation provided in compiled HTML help

and Adobe Acrobat® (PDF)

Available for download

http://www.teledynedalsa.com/imaging/support/

Sapera Processing Imaging Development Library

(available for Windows or Linux – sold separately):

Contact Teledyne DALSA Sales

Teledyne DALSA Software Platform for Linux

GigE-V Framework Ver. 2.0 (for both X86 or Arm type processor)

Available for download

http://teledynedalsa.com/imaging/products/softwar

e/linux-gige-v/

Third Party GigE Vision Development

Third Party GigE Vision Software Platform Requirements

Support of GenICam GenApi version 2.3

General acquisition and control

Support of GenICam GenApi version 2.3

File access: firmware, configuration data, upload &

download

Support of GenICam XML schema version 1.1

GenICam™ support — XML camera description file

Embedded within Genie Nano

About GigE Vision

Genie Nano cameras are 100% compliant with the GigE Vision 1.2

specification which defines the communication interface protocol used by any

GigE Vision device. The device description and capabilities are contained in an

XML file. For more information see:

https://www.visiononline.org/vision-standards-details.cfm?type=5

Genie Nano cameras implement a superset of the GenICam™ specification

which defines device capabilities. This description takes the form of an XML

device description file respecting the syntax defined by the GenApi module of

the GenICam™ specification. For more information see

www.genicam.org

The Teledyne DALSA GigE Vision Module provides a license free development platform for Teledyne

DALSA GigE hardware or Sapera vision applications. Additionally supported are Sapera GigE Vision

applications for third party hardware with the purchase of a GigE Vision Module license, or the

Sapera processing SDK with a valid license.
The GigE Vision Compliant XML device description file is embedded within Genie Nano firmware

allowing GigE Vision Compliant applications access to Genie Nano capabilities and controls

immediately after connection.

Summary of Contents for C1240








































































































































































































































































































































Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands

Dalsa C1240, User Manual

Search results

Summary of Contents for C1240

Reviews:

Related manuals for C1240

Brands by name

Popular brands