Dalsa C1240, User Manual, Page: 172 / 327

162 • Operational Reference Nano Series GigE Vision Camera
Flat Field Correction Category
The Nano Flat Field Correction control as shown by CamExpert has parameters used to correct
sensor or lens luminance differences. Currently these controls are available on the NanoXL models
M/C 5100 and M/C 4090.
Parameters in gray are read only, either always or due to another parameter being disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications.
Flat Field Correction Feature Description
The following table describes these features along with their view attribute and device framework
version. For each feature the device version may differ for each camera sensor available. Such
differences will be clearly indicated for any applicable feature.
As Genie Nano capabilities evolve the device firmware version will increase, therefore identifying
the supported function package. New features for a major device version release will be indicated
by green text for easy identification.
The description column will indicate which feature is a member of the Teledyne DALSA Features
Naming Convention (denoted by DFNC), versus the GenICam Standard Features Naming
Convention (SFNC not shown).