24
IPS 10 000 – Firmware Versions 10.7.X| REV. 1.0.0 | © 2021 Dallmeier
Power Supply Modules
The SMAVIA appliance IPS 10 000 can be equipped and operated with three redundant power supply
modules (hot plug, hot swap). If a power supply module fails, the two left take the complete power sup-
ply. The operation will continue without interruption.
▶
Proceed as described in the following to exchange a defective power supply module.
Note that the following descriptions are based on devices with redundant
power supply modules. They equally apply to devices with only two power sup-
ply modules.
7.1
IDeNtIFY
In the case of service the faulty power supply module must be identified first. This includes three avail-
able options: via the information dialog, via the display on the front side of the appliance or via the
status LED on the front side of the power supply module.
7.1.1
Information Dialog
In the Information dialog extensive information on the current status of the power supply module are
displayed.
▶
Open the Info dialog via
System
>
Info
.
▶
Select the
power Supply
tab.
Fig. 7-1
grey
Power supply unit is not mounted
green
Power supply is active and okay
red
Power supply is defective/switched off
