dallmeier SeMSy iPS 10000 Service Manual Download Page 19 | Manualshive

Page: 19 / 30

dallmeier SeMSy iPS 10000 Service Manual Download Page 19

19

IPS 10 000 – Firmware Versions 10.7.X| REV. 1.0.0 | © 2021 Dallmeier

HDDs

The appliance is operated with several hard disks and a RAID system.

▶

Proceed as described below, to replace a defective hard disk drive.

6.1

IDeNtIFY

All hard disks are easily accessible on the front side of the device. First, the defective hard disk drive must
be identified. There are two options available for this purpose: via the information dialog or via the dis-
play on the front side of the appliance.

6.1.1

Information Dialog

In the information dialog comprehensive information about the current status of the hard disk drives
(HDDs) are displayed.

▶

Open the

Info

dialog via

System

>

Info

.

▶

Select the

hDD Status

tab.

Fig. 6-1

black

HDD is not mounted

green

HDD is active and OK

red

HDD is defective

yellow

HDD is not active and OK (RAID spare HDD)

orange

HDD is in recovery process (RAID)

▶

Check the status of the hard disk drives.

▶

Identify the defective hard disk drive.

«
...
17
18
19
20
21
...
»

Summary of Contents for SeMSy iPS 10000































Reviews:

No comments