dallmeier Panomera W Series, Commissioning

Page: 23 / 68

23
COMMISSIONING – Panomera® W Series | REV. 2.0.4 | © 2020 Dallmeier
8 Maintenance, Inspection and Cleaning
Maintenance and Inspection of the Device
Maintenance and inspection of the device may only be carried out by quali-
fied personnel in compliance with the regulations of the DIN VDE 0701-0702
series of standards (VDE 0701-0702: “Inspection after repair, modification of
electrical appliances – Periodic inspection on electrical appliances – General
requirements for electrical safety”).
Cleaning the Housing and the Polycarbonate Dome/Bubble
If it is necessary to clean the housing or the polycarbonate dome/bubble of
the device, observe the following notes:
NOTICE
Damage to the surfaces of the device due to improper cleaning practices
➡ Clean the outside of the housing with a clean, soft, dry and antistatic
cloth.
•
Do not use detergents.
•
Do not use microfiber cleaning cloths.
➡ Clean the polycarbonate dome/bubble with water and some hand
dishwashing liquid using a clean, soft and non-linting cloth or sponge.
•
Do not rub the polycarbonate dome/bubble with a dry cloth.
•
Do not use common glass cleaners.
•
Do not use microfiber cleaning cloths.
•
Avoid excessive rubbing.
•
To dry the polycarbonate dome/bubble, dab it carefully and gently
with a clean, soft, dry and antistatic cloth (e.g. a glasses cleaning
cloth) to avoid scratching the surface.