manualshive.com logo in svg

dallmeier MDF5450HD-DN, Commissioning Manual

Share
Download
dallmeier MDF5450HD-DN Commissioning Manual Download Page 12

12

 

Rev. 1.0.0 | © 2019 Dallmeier | www.dallmeier.com 

MDF5450HD-DN Commissioning

Appropriate Use

The MDF5450HD-DN is a high-resolution single-sensor network camera with fisheye lens for detailed capturing of a 360° panoramic field of view within 

a complete half-space (hemisphere – half of a sphere).

The lens-sensor unit of the device is built into an ultra-compact dome housing, the connected encoder unit into a separate box housing.

The device is designed for indoor installations in suspended ceilings and can be operated with Power over Ethernet (PoE, Class 0, IEEE 802.3af) or 

powered by an external 24 V DC power supply unit.

NOTICE

Damage to the device due to unsuitable mounting location

The device is exclusively designed for indoor use.

An outdoor installation is prohibited and may result in malfunction, damage, data loss and loss of warranty.

 

➡

Do not install/operate the device in outdoor environments.

Summary of Contents for MDF5450HD-DN

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands