dallmeier DVE-16, Configuration

Page: 27 / 33

DVE-4 / DVE-8 / DVE-16
www.dallmeier.com 27

Enable in the Normal Linkage section the Audible Warning check box.

Click Save .
5.4.2 Alarm Outputs
The four alarm outputs can be configured.

Open the
Alarm Output Settings
dialog via
Remote Configuration
>
Alarm Settings
>
Alarm Output
.
Fig. 5-30

Select from the Alarm Output field the required alarm.

Select from the Delay drop down box the required period.

Enter in the Alarm Name field a name for the alarm output.

Configure on the
Arming Schedule
tab the active time as described above if required.

Activate under Copy to Alarm the other alarm outputs for which these settings are to
be transferred.

Click Save .
5.5 Exception
For certain events (eg illegal user login, IP address conflict) the device can trigger an au -
dible warning signal.

Open the Exception dialog via Remote Configuration > Exception .