DVE-4 / DVE-8 / DVE-16
www.dallmeier.com
12
Time Server
If the
NTP
option is activated, the current time can be obtained from a time server.
Enable the
NTP
option.
Enter the IP address of the time server in the
Server Address
field.
Enter the port in the
NTP Port
field if required.
Set in the
Interval
field in which time interval (in minutes) the time server has to be
updated.
Click
Save
.
Manual Time Setting
IIf no time server is present, the time can be manually set.
Enable the
Manual Time Sync.
option.
Enter in the
Set Time
field the required time.
Enable the
Sync with computer time
option in order to synchronize the time with the
Device Time
if required.
Activate the
Enable DST
option (daylight saving time) if required.
Enter the
Start Time
and the
End Time
of the daylight saving time if required.
Enter the time difference of the daylight saving time in the
DST Bias
field if required.
Click
Save
.
5.2
Camera Settings
This area allows to make various settings for the connected cameras. It can be configured
among other settings for video streaming, displayed text, motion detection or a sabotage
alarm can be set.
5.2.1
Display Settings
This tab allows to set what is displayed in addition in the camera image and where: camera
name, time and date.
Open the
Display Settings
dialog via
Remote Configuration
>
Camera Settings
>
Display Settings
.
