DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
56
6.4.2.4
Sensor
The
Sensor
recording mode is only relevant for devices equipped with a sensor board (e.g.
DVS 600). Observe the separate documentations.
6.5
Video quality
The options of the video quality configuration depend on the used camera type and track
mode.
Note that for technical reasons it is not possible to use every setting combination. There
are dependencies between the single settings. In addition they depend on the number of
channels (cameras) used, the recorder model and the video standard (PAL/NTSC).
Incorrect configurations will be compensated by automatically adjusting of the values. In
some cases the track size has to be reduced or the number of available channels adjusted.
¾
Right-click
in the
Recording Settings
dialog on the relevant recording button.
The recording configuration dialog for the corresponding camera will be displayed.
¾
Proceed as described in the following.
6.5.1
Manual and automatic mode
Recording modes with video quality switching are available in these track modes. In this
case the following settings have to be made on the corresponding tabs
High Quality
and
Normal Quality
separately. The procedure is the same as described in the following.
Fig. 6-30 :
Normal / High Quality
6.5.1.1
Analogue cameras
¾
Ensure that the
Expert Mode
option is activated.
¾
Observe the explanations given below.
