DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
43
Fig. 6-15 :
Areas
dialog /
Active
Areas
¾
Select the relevant camera in the
Cameras
section.
¾
Ensure that th
e Active Areas
option is selected.
¾
Select the setting of
Inactive
areas.
¾
Mark one or more
inactive
areas by drawing a rectangle.
Fig. 6-16 :
Inactve
areas
¾
Proceed analogous for all active and inactive areas.
¾
Proceed analogous for all relevant cameras.
¾
Confirm with
OK
.
6.3.4.2
Private Zones
In default configuration the entire image will be displayed and recorded. Private zones can
be defined if specific image areas should not be visible. A black area will be displayed and
recorded instead of these zones.
¾
Open the
Areas
dialog via
Setup
>
Recording
>
Areas
.
