DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
87
Dallmeier electronic
11 Serial Interface
11.1
Setting
Ø
Open the
Serial Interfaces
dialog via
Setup
>
Interfaces
>
Serial
to configure the serial
interface (COM1).
Fig. 11-1:
Serial Interfaces
dialog
Ø
Define the
Function
of the interface.
NOTE
Additional settings may be required for some functions. See the
documentation supplied with the connected device for details
of these values.
Ø
Confirm with
OK
.
11.2
Functions
NOTE
The available functions of the interface depend on various soft-
ware and hardware options. The scope of functions depends on
the ordered version, not on the content of the documentation.
