DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
116
Dallmeier electronic
Ø
Define the source of the
Audio
signal if necessary.
Ø
Enter the maximum available
bandwidth
.
Ø
Confirm with
OK
.
15.4
Serial camera control
Suitable Dallmeier dome cameras can be connected directly (without DNI) to the recorder’s
serial interface. The dome camera can be controlled using the graphical user interface (see
documentation „Operation“) after configuring the recorder.
Ø
Open the
Serial Interfaces
dialog via
Setup
>
Interfaces
>
Serial
.
Fig. 15-18:
Serial Interfaces
dialog
Ø
Select
COM 1
as
Interface
.
Ø
Select
Transparent data channel
as
Function
.
Ø
Set all the other values as described in the dome camera’s documentation.
Ø
Finally confirm with
OK
.
Ø
Open the
Recording Settings
dialog via
Setup
>
System
>
Recording
>
Cameras/
Tracks
.
Fig. 15-19:
Recording Settings
dialog
Ø
Right
-click in the line of the relevant camera into the column
Control
.
The
Recording Settings
(sub-) dialog will be displayed.
Ø
Click
Serial…
.
