DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
108
Dallmeier electronic
14.8
VSC
A Dallmeier
VSC-1
(Video System controller) control station for dome / PTZ cameras can
be connected to the recorder.
Selection and control of the camera is done on the control station, displaying of the images
on a recorder’s monitor. The
Video System Controller
dialog allows the specification of
the
monitor
and the
split type
that will be used. These settings are valid in every mode
(with or without login).
Additionally the dialog allows the specification of the
permission
to use the control station
in Sequencer / Live mode (without login). This is done by adopting the permissions of a
user group.
Ø
Open the
Video System Controller
dialog via
Setup
>
System
>
VSC
.
Fig. 14-14
Ø
Set the relevant
Monitor
.
Ø
Set the
Split type
.
Ø
Set the
Permission
for the Sequencer / Live mode.
Ø
Finally confirm with
OK
.
NOTE
The permission
Other Permissions
/
Camera control
of the
relevant user group has to be activated separately in the
User
Management
.
