dallmeier DF2000A, Installation And Configuration Manual

Page: 11 / 41

11
Dallmeier electronic GmbH & Co.KG
4 Notes on operating the camera
!
The camera can be operated at 12 V DC or 24 V AC.
!
The DF2000A was designed for use with CS-mount lenses. An
adapter ring is required for use with C-mount lenses. Note the
lens type before using it. When using C-mount lenses without
an adapter ring, the camera could be damaged. This applies
especially for the sensors.
!
Lenses with DC control can be used for automatic iris control.
Video signal-controlled lenses are not supported.
!
If the camera or the cable connected to the cable is located near
sources of strong radiation, the video picture may be distorted.
!
The camera is equipped with automatic gain control (AGC). In
low light the picture may be altered (e.g. noise). This is not a
camera malfunction.
!
The quality of the video picture depends on the lens used, the
lighting and the monitor used to display the video picture.
!
Automatic white balance depends on the lighting used and can
cause color distortions in artificial light.
!
Poor lighting can lead to faulty white balance.