DF3000A(-DN) / DF3000AS(-DN)
20
Dallmeier electronic
8
Configuration
The configuration dialog is opened as follows:
Direct:
¾
Press the Enter button (K) for approx. 2 seconds.
UTC Remote Box:
¾
Press the OK button for approx. 2 seconds.
DMS Recorder:
¾
Select Camera control > Open / Close menu
PView:
¾
Select Camera control > Open / Close menu
Navigating the configuration menu is always by means of 4 directions keys, which are
referred to as Selector in the following. The button for input confirmation and calling a
submenu is called Enter button.
Two dots after a menu entry indicate that additional configuration
options are available in a submenu.
One dot means that the selected entry (command) is executed
by pressing the Enter button.
¾
Press the Selector up or down (
c
d
) to select a menu item from the list.
¾
Press the Enter button to call up the selected submenu or to execute the command.
¾
Press the Selector to the left or right (
e
f
) to change the respective setting value.
¾
To return from a submenu to the higher-order menu, select Previous Page and press
the Enter button.
NOTE
Please pay attention to chapter 8.5 Exit Menu when saving/
resetting settings already made or leaving the configuration.
8.1
Configuration for lenses with manual iris
If you use a lens with manual iris control, the factory preset must be changed before any
further configuration occurs.
¾
Choose Basic Functions in the main menu and set Lens Select to Manual.
Now you can make further settings or leave the configuration.
----------------- 3000 ------------------
>
Presets..
Basic Functions..
Image Functions..
Save / Exit Menu..
