DDF3000AV(-DN) / DDF3000AV(-DN) CasinoCam
®
18
Dallmeier electronic
6.5
Closing the housing
1. Place the coupling on the casing.
Ensure that the sealing ring is correctly
positioned on the camera holder.
IMPORTANT
Possible damage to the lens and the dome with extreme
alignment of the camera (vertical, horizontal).
When mounting, ensure that the dome does not jam the lens.
Do not use any force.
2. Turn the coupling carefully. The coupling is
correctly position if it fits into the guide and
cannot be turned.
3. Close the coupling with the 3 casing screws.
IMPORTANT
Possible camera damage caused by the ingress of water (IP67
compliance).
Tighten the screws as much as possible without using force
(max. torque 1.8 Nm).
CAUTION
Danger of injury from the camera falling down.
Before initial startup, make sure that the dome and the housing
base plate are securely mounted.
Fig. 6-16
Fig. 6-17
