14
Color code switching interface
According to the display requirements of the target scene, directly click the
corresponding color bar on the touch screen to switch to the selected color bar.
4.4
Image adjustment
This function is used for manual/automatic mode selection of image
adjustment.
Click on the touch screen to pop up the main menu. Click on the touch screen
to pop up the ICONS of automatic
/manual mode
as shown below. Click the
mode icon to select, and switch to the selected mode.
To adjust the mode manually, click to select the upper and lower temperature
values of the color label and slide your finger on the right side of the color label to
adjust the upper and lower temperature values of the color label separately or
simultaneously. Click the selected temperature value again to deselect it.
