Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
54
Rev: 0-2
Nov , 2011
0
5. Connect new fan and perform steps 1 to 3 in reverse order.
7.1.2
t43™
Fan Assembly Replacement
Tools required: None
To replace the fan assembly located at the top of the t43 unit please use following steps:
1. Turn counterclockwise quarter turn locking screw located at the lower right corner of the fan assembly
cover. Please refer to Figure 7-4 for locking screw location.
Figure 7-4 t43 Fan Assembly Replacement – Unlocking Fan Cover
2. Remove fan assembly cover by sliding it backwards - as shown in Figure 7-5.
Figure 7-5 t43 Fan Assembly Replacement – Removing Fan Cover
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 54 of 61