Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
44
Rev: 0-2
Nov , 2011
0
5.3.1.3 Delay Compensation Setup
48. From the Function Explorer Tree on the left select first
t43™
unit. The
t43™
main screen will appear.
49. Read and note “Optical Delay” value.
50. Repeat steps 48 and 49 for all
t43™
s that are connected to the
tHost™
and are operating in simulcast
mode. Determine and remember the maximum optical delay value that is read.
51. From the Function Explorer Tree on the left select
t43™
unit from the simulcast list.
52. Calculate Delay compensation value by subtracting maximum optical delay value from the delay value for
this
t43™
.
53. Set “Delay Compensation” to calculated value. Click on “Set Parameters” button to implement the
change.
54. Repeat steps 51 to 53 for all other
t43™
s that are on simulcast list.
Figure 5-16 t43™ Main Screen – Delay Compensation
DRU
T-HostQS-Cw01
T-43D-S01
T-43D-S02
T-43D-C05
T-43D-C07
DL Attenuation
DL System Gain
UL Attenuation
UL System Gain
dB
dB
dB
dB
DL Output Power
UL Input Power
PA Temperature
DL VSWR
DL VSWR Treshold
dBm
dBm
o
C
DL Attenuation
DL System Gain
UL Attenuation
UL System Gain
dB
dB
dB
dB
DL Output Power
UL Input Power
PA Temperature
DL VSWR
DL VSWR Treshold
dBm
dBm
o
C
System
Optical Delay
Delay Offset
us
us
Serial Number
Software Version
M&C Status
Alarm
Set Parameters
Set Parameters
Set Parameters
Configuration
AWS
PCS
T-43D-S01
DL
UL
Alarm
On
Off
On
Off
Status
Status
ON
ON
DL
UL
Alarm
On
Off
On
Off
Status
Status
ON
ON
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 44 of 61
