![Dali Wireless Transcend t43 Installation And Operation Manual Download Page 34](http://html1.mh-extra.com/html/dali-wireless/transcend-t43/transcend-t43_installation-and-operation-manual_3285949034.webp)
Transcend
t
43™ Dual-Band DAS
DW-010-7373-09
Installation and Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
34
Rev: 0-2
Nov , 2011
0
13. .On the
tHost™
main page select “Net Config” button. The Network Configuration screen will appear.
Enter the following network configuration parameters:
a. Select the static or dynamic button: If there is a third party DHCP server on the network that will
be providing an IP address to the
tHost™
then choose dynamic. If not, then choose static and
enter the following parameters as provided by the network administrator.
i. IP Address: This is the remote address of the
tHost™
ii. Network Mask
iii. Default Route
b. Set the SNMP server address. This is the IP of the device that will receive the SNMP traps
14. Click on “Set” button to implement the changes.
5.2.4 Remote Access
Access to the web interface is available through the “Remote” port at the address defined above.
When configured via DHCP, the
tHost™
can also be located by entering a unique name into the web browser.
Record the last five digits of the serial number marked on the back panel of the
tHost™
. Use those digits to form
. For example, if the last five digits are CC0BB then the address would
be:
. When providing access from a remote location, through the firewall, direct TCP port
80 to the
tHost™
. For maintenance activities provided by Dali Wireless, provide access to TCP port 22 on the
tHost™
.
5.2.5
tHost™
Name Assignment and BTS Sector Assignment
15. On the
tHost™
main page select “Configuration” button. The
tHost™
Configuration screen will appear.
Figure 5-4
tHost™
Main Screen - Configuration
DAU
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
DL
UL
Alarm
On
Off
On
Off
System
Serial Number
Software Version
Alarm
Set Parameters
Set Parameters
Configuration
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
DL Attenuation
UL Attenuation
dB
dB
DL Input Power
DL Input Power Low Threshold
DL Input Power High Threshold
UL Output Power
dBm
dBm
dBm
dBm
Set Parameters
Set Parameters
Set Parameters
PCS
PCS
AWS
AWS
T-HostQS-Cw01
Status
Status
ON
ON
DL
UL
Alarm
On
Off
On
Off
Status
Status
ON
ON
DL
UL
Alarm
On
Off
On
Off
Status
Status
ON
ON
DL
UL
Alarm
On
Off
On
Off
Status
Status
ON
ON
Input DC Supply
V
-47.5
T-HostQS-Cw01
T-43D-S01
T-43D-S02
T-43D-C05
T-43D-C07
Net Config
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2004
Page 34 of 61