DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
U•V6
Instruction Manual
43
|
65
Certified
ISO9001 • VCA
The user can confirm the password they have entered by pressing
ENTER
. If it has been
entered correctly, the Services Menu is activated and the
Tests Menu
sub-menu is
displayed.
If the password entered is incorrect, the main menu remains active and the
Service Menu
is
displayed again.
5.1
Advanced System Tests
Outputs Tests
Navigation :
Service menu
→
Tests menu
→
Outputs test
This item on the
Test Menu
allows the user to temporarily force the outputs to activate, in
order to verify that they are working correctly (relays and siren).
Once the output test option has been selected, the user must select the output to be tested
using the
Up
and
Down
arrow keys.
The status of the selected output is displayed each time.
General fault relay
Not activated
Technical-Fault Relay
Alarm relay 1
Not activated
Alarm Relay 1
Alarm relay 2
Not activated
Alarm Relay 2
Alarm relay 3
Not activated
Alarm Relay 3
Alarm relay 4
Not activated
Alarm Relay 4
Alarm relay 5
Not activated
Alarm Relay 5
Testing an output of the U•V6 unit means that it is activated, along with the servos that are
connected to it (a gas valve or siren, etc.).
This test does not allow the user to disable an output that has already been enabled.
