DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
U•V6
Instruction Manual
36
|
65
Certified
ISO9001 • VCA
External Alarm Menu
Navigation :
Info menu
→
Configuration info
→
External alarm
info
The
External Alarm Menu
sub-menu allows the user to view the settings associated with the
external alarm input, i.e. its behaviour and the actions that are triggered when it switches.
Status
[Enabled/Disabled]
Status of the external alarm input: enabled/disabled
Alternate name
[name set]
Allows the user to view the name given to the
external alarm
Latching mode
[Latching/Non-latching]
Latching mode for the external alarm
Relay addressing
Configuration of the addressing of relays that are
potentially associated with the external alarm
Siren addressing
[Addressed/Non-addressed]
Configuration of the addressing of the siren that is
potentially associated with the external alarm
Normal state
[Normally closed/Normally
open]
Normal status of the external alarm input
a)
Status of the External Alarm
The external alarm can have the following statuses:
▪
Disabled
: a status change on the input will not have any effect
▪
Enabled
: a status change on the alarm input is triggered, based on the type of mode
configured on the U•V6 unit
b)
Latching Mode
Latching mode
allows the user to configure the latching mode for the external alarm:
▪
Latching
: when the cause of the alarm is gone, the alarm remains active until
manual action is taken on the unit (
RESET button pressed twice
).
▪
Non-latching
: when the cause of the alarm is gone, the alarm is automatically reset
and disappears.
c)
Relay Addressing Mode from the External Alarm
Ext. Alarm Addressing
allows the user to specifically address each relay, based on the
activation of the external alarm:
