DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
U•V6
Instruction Manual
31
|
65
Certified
ISO9001 • VCA
Addressing
Relay-addressing mode based on alarm level
b)
Relay Addressing by Input Channel
The user can use this menu to see the relay(s) that will be activated for each alarm level and
for each input channel in the event that the alarm condition is met.
Alarm type
Addressed
/
not Addressed
The following configurations are possible on the channel X, alarm level Y and relay Z menu:
▪
Unaddressed
: the selected relay, Z, will not be activated based on the selected
alarm, Y, for the selected channel, X.
▪
Addressed
: the selected relay, Z, will be activated when the alarm condition, Y, for
channel X is met.
▪
Siren Mode
: the selected relay, Z, will act like an output siren: the relay will be
triggered when there is an alarm, but it will be possible to disarm it by
pressing
MUTE/RESET
on the keyboard.
Target Gases
Navigation :
Info menu
→
Configuration info
→
Target gas info
The U•V6 unit has a logic that is closely associated with the concept of “target gas”. A target
gas can be linked with each input channel and the alarm levels are linked with each target
gas. This logic allows the user to configure the control unit easily and systematically.
The items on this U•V6 unit sub-menu allow the user to see the different settings that are
specific to each target gas targeted by one or more channels of the unit.
Select target gas
CO 300 ppm
The
Alarm Threshold
,
Latching Mode
and
Addressing
sub-menus are only visible if the
alarm level has been activated.
The user can only view the configuration. Any modifications must be carried out by a
technician certified by
DALEMANS SA/NV
.
