DALEMANS U-H1, Instruction Manual

Page: 6 / 40

6
www.dalemans.com
|
1.2 SAFETY INFORMATION
Symbol
Description
Protective ground terminal
Warning : risk of electric shock
Warning : refer to instruction manual
The following units are used throughout this document
Ah Ampere-hour
VAC Voltage with alternative current in volts
VDC Voltage with continuous current in volts
mA Current in milliampere
W Power in watt
The installation and commissioning of
U•H1 control unit must be performed by qualified personnel only.
This qualified personnel is trained and accredited by DALEMANS SA During installation, refer to the
standards in application.
Should the equipment be installed or used in a manner not specified by
DALEMANS SA , the protection
provided by the equipment may be impaired.
Modification, disassembling and total or partial destruction of this equipment may invalidate the essential
safety requirements of the whole plant.
For commissioning, please contact
DALEMANS SA to arrange an appointment.
Do not open the equipment without disconnecting mains power supply first