DALEMANS D-TEX3F+, Instruction Manual

Page: 12 / 18

www.dalemans.com
|
12
3.2. Assembly
The
D•TEX3F+
detector is mounted flat on a wall or a ceiling according to the dimensions given in
Figure 3.
▪
Mount the detector using suitable screws and pins.
▪
Make sure that dust deposits do not obstruct the sensor and that water does not enter the
detector.
▪
The
D•TEX3F+
may be mounted horizontally or vertically.
▪ For vertical assembly, the box’s cable glands can be oriented upwards or downwards but the
cover must always be in the position below.
Figure 4: vertical mounting of the D•TEX3F+
BOTTOM
TOP
24 V G ND O UT
BOTTOM
TOP