ASSEMBLY INSTRUCTIONS:
Item No: 7560/965
1. Carefully unpack and lay out the parts as shown in illustration.
2. Place the base (A) onto a smooth surface.
Screw the threaded rod (B) into the base (A),
3. Adjust the knurl nut on threaded rod.
This can be used to raise the shade a little if necessary.
4. Place the shade (D) over threaded rod (B).
5. Place the cap (E) over the shade (D) and then tighten with
the finial (F) securing the shade in place.
Recommended (2) maximum 60WATT Type “A” Bulbs
or (2) maximum 13Watt CFL bulbs. (Bulbs not included).
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth. Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision - 04/23/13
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
