ROLLOMAXIMUM XL
Page 14
ROLLOMAXIMUM is supplied with factory settings, but fine adjustment will always
be required before use. Numerous adjustment options make the machine more
flexible and optimise its use.
To ensure that the ground is uniformly worked, the drawbar must be correctly
aligned to the tractor used.
Adjusting drawbar height
Supported on a level concrete floor or
similar, the machine is folded out to
working position and the transport
wheels (A) raised free. The cracker-
board (B) and harrow section (C) are
also raised, so that the machine is
now only supported by the two com-
paction sections. In this position, the
entire drawbar shaft (D) should be
level. If it is not so, the assembly
should be adjusted by the drawbar
eye (E) and flange plate (F) until the
drawbar shaft is horizontal.
Driving and operation
Correct operation is vital to get the most out of the ROLLOMAXIMUM. This applies to
working in the field and to safety. Always ensure you are fully familiar with all safe-
ty features of the machine.
Extending and retracting
Extending and retracting the machine must always be performed with the tractor
parked, and on a level surface.
Ensure there are no personnel within the machine's working radius when extending
or retracting.
Extension
A
B
C
D
E
F
Horizontal
