DALBO MEGAROLL 2130, Manual, Page: 6 / 38

MEGAROLL
4
Safety
This symbol is used throughout the instruction manual each time advice is given
concerning your safety, the safety of other users or the safe use of the machine. All
safety instructions must be observed and made available to all users of the
machine.
This symbol is used throughout the instruction manual when there are points
that are especially important for the functionality as well as the lifetime of the
machine.
These symbols indicate that protective equipment is required
during the operation, maintenance and repairs of the machine.
- Different types of gloves may be required to be used, depending on task.
-
Approved safety footwear must be worn at all times, when working at and around the machine.
General
- Before commencing work, the user must be familiar with all parts of the machine.
- Safety markings have been placed on the machine, which contain important instructions
about your own and the safety of others and the correct use of the machine.
- There must be no passengers on the machine, when in use or while being transported.
- When operating the MEGAROLL , ensure that there is no one within the machine’s operating
radius. The machine may only be operated from inside the tractor.
- When the MEGAROLL is folded up, ensure that the side sections are in the transport locks.
Likewise, secure the control levers to prevent accidental operation.
- Before leaving the tractor, performing any adjustments, or carrying out any maintenance or
repairs to the MEGAROLL, unfold the machine and lower it to the ground, or, secure it in transport
mode, activate the tractor's parking break, turn off the engine and remove the ignition key so that
the machine is secured against accidental starting.
- Remember to secure the supporting legs with the hydraulic ball valve as well as the bolts with
linchpins.
- Never leave the driver’s seat while the machine is operating.
- The driving speed must always be adjusted according to the prevailing conditions.
- Only use the machine if all safety devices have been installed. Defective
safety devices must be replaced immediately.
- All work with and around the machine must be performed wearing approved safety footwear.
- Any work involving the use of oil and grease must be performed wearing gloves approved for the
specific task.