DALBO MEGAROLL 2130, Manual

Page: 12 / 38

MEGAROLL
10
Connecting and Disconnecting
Connecting
Fig. 2
1. The MEGAROLL is connected to the tractor’s
fixed drawbar, whereby the towing eye (A) must
be between the drawbar’s forks.
2. The tow bar pin must be inserted and secured
with a linchpin
3. The support leg must be raised by activating
button 1 (B) and activating the hydraulic hose
marked with white
Remember to secure the pin with linchpins or similar.
Hydraulics
By default, the MEGAROLL requires three double-acting hydraulic outlets, an air outlet for the air
brakes, and a 3-pole power outlet.
The machine is equipped with electronic controls, making it possible to use the same hydraulic
outlet for several things (hydraulic hose marked in white).
To utilise the electronic control, it must be connected to the power and then the relevant toggle switch
(A) for the operation desired should be activated so that the relevant LED (B) is on. Only one switch must
be activated at one time. This hydraulic outlet is also used to pressurise the inner stone protectors by
opening the ball valve (C) and not activating any switches.
Fig. 3
The switches control the following:
None: Stone protector 5 innermost sections.
•
(No switches activated).
1. Hydraulic support leg.
2. Tilt cylinders on the main frame.
3. The raising and lowering of the middle roller.
4. Folding the outermost side sections in and out.
A
B
B
A
C