DALBO MAXICUT 920, Manual, Page: 23 / 49

MAXICUT
Page 23
Extra equipment
It is possible to equip the MAXICUT 920 with different types of extra equipment if necessary.
-
Wave plates with different widths (wave heights) and design
-
Grass drums (Smooth steel drums for grass areas)
-
Mole planks (Primarily in combination with Grass Drums)
-
Saw equipment for post-tilling or grass care
Wave plates

EXTREMELY IMPORTANT: The plate sections must be fully lowered before being
folded with the machine. Otherwise the machine and the plates could be damaged.
The wave plates have two primary functions:
1.
To cut the stumps/stems that lie across the direction of travel and therefore may not be
cut off by the large rollers/drum.
2. To mix a bit of soil in with the stump to remove the stump faster. This also means that
the large drum mixes more soil into the stump. Thus there is loose soil to work with.
The plates are available in different widths and wave designs, depending upon the conditions
under which they operate.
Fig. 11