DALBO MAXICUT 920, Manual, Page: 19 / 49

MAXICUT
Page 19
Driving and operating
Proper operation is important in order to get optimal performance from your MAXICUT.
This applies not only to working in the field but also in terms of safety. It is therefore crucial
that you have thoroughly read the safety precautions that cover the machine.
Unfolding and folding
Unfolding and folding are conducted with the tractor in park.
Before unfolding, ensure that no person is positioned near the machine.
Unfolding
Fig. 8
1 The machine is raised as high as possible
with the timing belt and pull (hose marked
with: yellow), after which the side frames
are lifted free of the transport latches with
the lifting cylinders (hose marked with:
red) and are folded out with the folding cyl-
inders (hoses marked with: blue).

If additional equipment is fitted on the machine, it is important that this is com-
pletely lowered before the machine is started or unfolded.
Fig. 9
2 The machine is lowered and the timing
belt is tilted up in the air (hose marked
with: yellow)
Timing belt and hydraulic pull are fol-
lowed by automatic lifting and lowering.
Fig. 10
3 Press the large cylinders on the side
frames (the hoses are marked with:
Red), so a pressure of approx. 45 bars is
achieved. This can be read on the ma-
nometer. Once the desired pressure has
been reached, the hydraulic lever in
question is set to float position.
The hydraulic weight distribution is now
activated and work can be started.