DALBO MAXICUT 260 Series, Manual

Page: 7 / 32

MAXICUT
Page 7
Safety
You will see this symbol in the instruction manual each time advice is given about your
safety, the safety of other users, or the functional safety of the machine. All
safety
instructions must be observed and made available to all users of the machine.
General

Before starting work, the user must be familiar with all parts of the machine.

Safety markings have been placed on the machine that contain important
instructions about your own safety and of others, as well as on the correct use of
the machine.

There must be no passengers on the machine, either during work
or
transportation.

When operating MAXICUT, ensure that there are no people within the machine's
reach.

When MAXICUT is in transport mode, the seat sections are locked by turning the
handle in the drop-down boxes in the bottom before driving on public roads.
Likewise, this secures the control levers against accidental operation.

Before leaving the tractor, performing any adjustments, maintenance or repairs
to MAXICUT, unfold the machine and lower it to the ground or, secure it in
transport mode, put the brakes on the tractor, turn off the engine and remove the
ignition key so that the machine is secured against accidental starting.

Remember to secure nails with linchpins, and secure blade drums with regards to
transport and working mode by using the handle of the roller boxes.

Never leave the driver's seat while the machine is running.

The driving speed must always be adjusted to the conditions.

Only use the machine if all safety devices have been mounted. Defective safety
devices must be replaced immediately.