DAL-BO MaxiDisc, Manual

Page: 7 / 38

MaxiDisc
Side 7
Safety
The safety alert symbol is used throughout this manual to identify important
safety warning messages concerning your safety, the safety of other users or
the functional safety of the implement. Observe all safety instructions and
make them readily accessible to all users of the equipment.
General

The operator must be thoroughly familiar with all safety precautions and
operations of this equipment prior to using.

The safety signs on the MaxiDisc contain important instructions concern-
ing your safety, the safety of those around you, and the correct operation
of the machinery.

Never allow anyone to ride on the implement during operation or
transport.

Never allow bystanders within the operating radius of the MaxiDisc when
the implement is in operation. Operate the MaxiDisc only while seated in
the driver’s seat of the tractor.

Ensure that wing section locks are engaged when the MaxiDisc is in a
folded position. Secure control levers against unintentional operation.

Before performing any adjustments, maintenance or repairs on the ma-
chinery, always unfold the MaxiDisc and lower the implement to the
ground or secure in transport position, set the tractor brakes, turn off the
engine and remove the ignition key.

Remember to secure the hitch stand and the lift arms (if applicable) with
lynch pins.

Operate the tractor and MaxiDisc only while seated in the driver’s seat.

Always drive according to conditions.

Do not use the MaxiDisc unless all safety signs are installed. Replace de-
fective safety signs immediately.