Front Panel Instructions
33
Section 8:
Front Panel Instructions
Many of the video processor settings can be changed through the
Front Panel Interface.
To scroll through the settings, use the left and right arrows. To change a setting, use the up and down
arrows. When you have the setting at the desired value, use the middle button to apply the settings.
Note:
The settings are not saved until you save the configuration. Rebooting the processor
will cause the settings to revert. The configuration using the front panel under the
Configuration (CF) setting to the last saved configuration.
Here is a list of the settings that can be changed through the front panel:
•
Channel
•
Set Input
•
Edge Blending
•
Viewable Area Top
•
Viewable Area Left
•
Viewable Area Height
•
Viewable Area Width
•
Window Area Top
•
Window Area Left
•
Window Area Height
•
Window Area Width
•
Transparency
Figure 42: Front Panel