Daktronics SPORTSOUND 1500HD GEN II, Installation Manual

Page: 31 / 46

THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS
DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT
REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED
WRITTEN CONSENT OF DAKTRONICS, INC.
COPYRIGHT 2010 DAKTRONICS, INC.
DAKTRONICS, INC.
NOTES:
1.0 REFERENCE
1.1 REFER TO DAKTRONICS RISER DIAGRAM FOR ALL ELECTRICAL
POWER AND DATA SPECIFICATIONS.
1.2 THE SHOWN SYSTEM MUST BE APPROVED BY THE CUSTOMER
AND ALL BASE SUPPORT STRUCTURE MUST BE CERTIFIED IN THE
STATE IN WHICH IT IS INSTALLED BY A QUALIFIED STRUCTURAL
ENGINEER BEFORE FABRICATION OR ERECTION.
2.0 GENERAL NOTES
2.1 ALL DIMENSIONS ARE IN FEET AND INCHES.
2.2 REFER TO INSTALLATION AND MAINTENANCE MANUAL FOR
COMPLETE INSTALLATION INSTRUCTIONS.
3.0 SOUND CABINET NOTES
3.1 DAKTRONICS SOUND CABINET IS STEEL CONSTRUCTED
SKELETON WITH METAL PANELING FASTENED TO ITS EXTERIOR.
3.2 REFERENCE DRAWING NUMBERS FOR FUTHER
DETAILS.DRAWINGS: 974414, 975324, 974415, 974503, 974682
3.2 LIFTING POINTS ARE PROVIDED BY DAKTRONICS. WHEN LIFTING
USE 45° OR GREATER, FROM THE HORIZON, CABLE SYSTEM.
3.3 PAINT COLOR:
SPEAKER CABINET COLOR: POWDER COAT BLACK.
4.0 STRUCTURAL NOTES
4.1 FABRICATION AND ERECTION SHALL CONFORM TO THE LATEST
EDITION OF AISC SPECIFCATIONS.
4.2 ALL WELDING (SHOP AND FIELD) SHALL BE PERFORMED IN
ACCORDANCE WITH AWS D1.1-LATEST EDITION SPECIFICATIONS BY
A CERTIFIED WELDER USING E70XX ELECTRODES.
4.3 SUPPORTING STRUCTURE MUST NOT INTERFER WITH
ELECTRICAL CONNECTIONS SHOWN IN BOTTOM VIEW.
4.4 THE STRUCURE WILL WITHSTAND
A 150 MPH (3-SEC GUST) DESIGN WIND SPEED
WITH OVERALL DESIGN PRESSURE OF 90 PSF
ACCORDING TO ASCE 7-05 (EXPOSURE C).
4.5 THE DESIGN WIND PRESSURES WERE SHIFTED AND ADJUSTED
TO ACCOUNT FOR ASCE 7 PRESCRIBED OFFSET EFFECTS.
4.6 THE STRUCTURE HAS BEEN DESIGNED TO SUPPORT
A DESIGN ROOF SNOW LOAD OF 60 PSF.
4.7 THE STRUCTURE HAS BEEN DESIGNED TO SUPPORT LATERAL
SEISMIC LOADING EQAUL TO 2.0 TIMES GRAVITY.
4.8 EACH LOCATION AND USE HAS UNIQUE LOADING
REQUIREMENTS AND THE SUPPORTING STRUCTURE SHALL BE
EVALUATED FOR EACH. DAKTRONICS ASSUMES NO RESPONSIBILITY
FOR THE ADEQUACY OF THE SUPPORTING STRUCTURE TO
SUPPORT THE SPEAKER CABINET.
5.0 PROJECT RESPONSIBILITY
5.1 DAKTRONICS' AND CUSTOMER SUBCONTRACTORS SHALL
VERIFY ALL EXISTING CONDITIONS AND DIMENSIONS PRIOR TO
INSTALLATION.
5.2 ALL SUBCONTRACTORS SHALL PERFORM WORK IN
ACCORDANCE WITH OSHA REQUIREMENTS AND ANY LOCAL CODES
THAT APPLY.
5.3 EACH SUBCONTRACTOR IS SOLELY RESPONSIBLE FOR JOBSITE
SAFETY.
5.4 ERECTION SUBCONTRACTOR IS SOLELY RESPONSIBLE FOR
DESIGNING AND PROVIDING TEMPORARY BRACING.
5.5 EACH SUBCONTRACTOR IS RESPONSIBLE FOR THE REMOVAL
AND DISPOSAL OF WASTE MATERIALS ON THE JOBSITE.
TOTAL SOUND SYSTEM WEIGHT: 1550 LBS
POWER IN LOCATION.
20 AMP 208-240VAC @1
REQUIRED
DIM "A"
MAXIMUM
SEE CHART
NOTES:
DIM "A" REPRESENTS THE MAXIMUM DIMENSION FROM THE BACK OF SOUND SYSTEM TO
BACK WELD LOCATION OF "ATTACH-TO STRUCTURE" PER DESIGN WIND PRESSURE.
THE "ATTACH-TO STRUCTURE" SHOWN IS FOR CONCEPTUAL PURPOSES ONLY. THE
APPROPRIATE LOADING CONDITIONS AND THE SIZE OF THE "ATTACH-TO STRUCTURE" SHALL
BE EVALUATED FOR EACH USE OF THIS SYSTEM AND IS NOT EVALUTED IN THIS DRAWING.
TOP VIEW
FRONT VIEW
FRONT VIEW
BOTTOM VIEW
SIDE VIEW
REAR VIEW
ISOMETRIC VIEW
ISOMETRIC VIEW
8'-0"
[2438mm]
OVERALL WIDTH
7'-7 1/2"
[2325mm]
PICK POINTS
0'-1 5/8"
[40mm]
MESH BORDER
7'-9"
[2361mm]
COPY AREA
5'-4 3/4"
[1644mm]
COPY AREA
6'-0"
[1829mm]
OVERALL
(1) DAKTRONICS MID-RANGE
SPEAKER CABINET.
CAPABLE OF A MAXIMUM OF -15
DEGREES VERTICAL ADJUSTMENT.
(1) DAKTRONICS LOW-RANGE
SPEAKER CABINET
W/O MESH "GRILLE"
W/O MESH "GRILLE"
STEEL TUBE CONSTRUCTED
SOUND CABINET. SEE
DAKTRONICS STRUCTURAL
DRAWINGS FOR FURTHER
MEMBER SIZES AND DETAILS.
0.125" ALUMINUM
PANELS ATTACHED TO
TOP OF CABINET.
CONCEALED FASTENER 0.063"
ALUMINUM PANELS ATTACHED
ON SIDES AND BACK.
ACOUSTICAL MESH "GRILLE"
ARTWORK TO BE APPROVED BY
CUSTOMER.
FRONT "GRILLE" FRAME CAN BE REMOVED
FOR SPEAKER MESH RE-INSTALLATION.
(4) 3/8" HARDWARE SETS ON TOP &
(4) 3/8" HARDWARE SETS ON BTM
SECURE FRAME TO STEEL CABINET.
"GRILLE" FRAME APPROX. 75 LBS.
(3) REAR ACCESS DOOR FOR SERVICE
OF INTERNAL COMPONENTS IN CABINET.
DOORS CAN BE REMOVED BY TURNING
LATCHES WITH A STRAIGHT EDGE
SCREWDRIVER AND LIFTING DOOR
OUT OF BOTTOM CHANNEL.
4'-4 5/8"
[1337mm]
DOOR
1'-8 3/8"
[517mm]
DOOR
2'-11 3/8"
[899mm]
PICK POINTS
6'-0"
[1829mm]
OVERALL
(1) DAKTRONICS HIGH-RANGE
SPEAKER CABINET LINE ARRAY.
CAPABLE OF A MAXIMUM OF -15
DEGREES VERTICAL ADJUSTMENT.
CONTROL/POWER
CONTROL
ENCLOSURE.
FRONT OF SOUND
SYSTEM
3'-9 3/4"
[1162mm]
3'-9 3/4"
[1162mm]
1'-4"
[406mm]
MAXIMUM
TYPICAL WELD DETAIL FOR EACH
MAIN BOTTOM TRANSVERSE MEMBER.
(6 LOCATIONS)
0'-0 3/4"
[19mm]
DOOR
SPORTSOUND CONTROL ENCLOSURE.
SPEAKER DATA IN LOCATION
(1) W-1614, AUDIO CABLE, 2 PAIR, 22AWG
(1) W-1489, FIBER CABLE, 6 CORE
CABLE PROVIDED BY DAKTRONICS
INSTALLED BY DAKTRONICS
SUBCONTRACTOR.
POWER AND SIGNAL
ENTRANCE
* DO NOT OBSTRUCT*
1'-10 3/8"
[567mm]
1'-0"
[305mm]
SS1500HD
SOUND
SYSTEM
1'-4"
[405mm]
MAXIMUM
VARIOUS
DISPLAYS
1/4 2" MIN
TYPICAL ON ALL
(6) LOCATIONS
(4) 1/2" REMOVEABLE LIFT EYES. DESIGNED FOR MAX.
45° SLING ANGLE. WHEN POSSIBLE
USE A PROPERLY SIZED SPREADER BEAM
WHEN LIFTING SOUND SYSTEM.
DIM "A"
SEE CHART
MAX HEIGHT
60' 0"
0'-3 5/8"
[91mm]
BORDER
SPORTSOUND
1500HD
STANDARD SHOP
DATE: REV BY:
01 16 MAR 09
KCS
ADDED WELD LOCATIONS, CHANGED WELD SYMBOL
ADDED POWER AND SIGNAL REQUIREMENTS
UPDATED REAR DOOR PANEL
DATE: REV BY:
02 19 JUN 09
KCS
UPDATED STRINGER DISTANCES AND COLUMN
SIZES PER STRUCTURAL CERTIFICATION DRAWINGS
DATE: REV BY:
03 16 JUN 10
DMT
UPDATED STRUCTURAL DESIGN, AND
ATTACHMENT CHART
APPROVED
APPROVED AS NOTED
APPROVED AS NOTED & RESUBMIT
COMPANY:
SIGNED:
TITLE: DATE:
SUBMITTAL APPROVAL
SIDE VIEW
DATE: REV BY:
04 12 JAN 11
JLR
UPDATED DRAWING PER REAR ACCESS DOOR UPDATE
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS
DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT
REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED
WRITTEN CONSENT OF DAKTRONICS, INC.
COPYRIGHT 2010 DAKTRONICS, INC.
DAKTRONICS, INC.
CH
DRAWN: DATE:
SHEET JOB NO: REV
SPORTSOUND SYSTEMS
SHOP DRAWING; SOUND SYSTEM; 1500HD
KSCHNAB 12 NOV 08
P1534 E 10 C
3/8" = 1'
KSCHNAB
752494
07 501
NOTE:
THE 2 LIFT EYES ON THE FRONT MESH FRAME SHOULD NOT BE
USED WHEN LIFTING THE CABINET INTO POSITION. THESE ARE TO
BE USED ONLY WHEN REMOVING THE MESH FRAME FROM THE
CABINET FOR MAINTENANCE PURPOSES.
LEAVE THESE 2 LIFT EYES ON THE MESH FRAME AFTER
INSTALLATION IS COMPLETE.
DATE: REV BY:
05 9 JUN 11
MBJ
UPDATED TOP, BTM & SIDE VIEWS
DATE: REV BY:
06 19 OCT 12
KCS
UPDATED CABINET VIEWS WITH NEW CRTL ENCL.
3'-6" [1068mm]
OVERALL W/O DOORS
DATE: REV BY:
07 18 JUL 13
KCS
UPADTED REAR ACCESS DOOR VIEWS WITH NEW
LATCH AND HANDLE