Daktronics SMALL MATRIX GALAXY GS6 Series Installation And Operation Manual Download Page 43

Page: 43 / 45

Legacy Remote Display Configuration

Connect A Display To A Static IP Network

Display Currently Configured for DHCP (Default)

The following steps explain how to set a static IP address on the display.

Network Requirements

• Existing Network
•

Available network port, configured properly

• PC
• Internet Explorer or Firefox web browser

Configuration Steps Using IP Address

1�

Connect a computer to the display.

2�

Configure the computer for DHCP

3�

Turn on the display.

Note:

Both the display and the computer should timout searching for a DHCP server

and fall back to auto IP addresses of 169.25x.x.x.

4�

Observe boot sequence–reconfigure computer to same in the IP address range as

the display and same subnet.

5�

Manually enter IP address in web browser, http://display IP address:85 or see the

Configuration Using DisplayFind To Discover The Display (p.37)

section.

6�

Enter

User Name Dak

and

Password DakPassword!

in the

Windows Security

window.

7�

Click

Logon

to connect to the display (refer to the help file for additional information

about the configuration utility).

Summary of Contents for SMALL MATRIX GALAXY GS6 Series














































Search results

Summary of Contents for SMALL MATRIX GALAXY GS6 Series

Reviews:

Related manuals for SMALL MATRIX GALAXY GS6 Series

Brands by name

Popular brands

Daktronics SMALL MATRIX GALAXY GS6 Series, Installation And Operation Manual

Search results

Summary of Contents for SMALL MATRIX GALAXY GS6 Series

Reviews:

Related manuals for SMALL MATRIX GALAXY GS6 Series

Brands by name

Popular brands