Daktronics OMNISPORT 2000, Operation Manual

Page: 67 / 182

Swimming Mode Menus & Settings
57
Setup Printer Menu
This menu configures which printouts will be printed on the
built-in printer in the console as well as the intensity of the
print on those printouts.
Race Log
The Race Log menu allows race logging to be turned ON/
OFF. Typically the Race Log is set ON. As times are registered,
the printer will automatically print the results.
MENU-PRINTER
RACE LOG: ON*
From Main Menu – [4]>[5]>[1]
Use [←][→] to toggle race logging ON or OFF and then press [ENTER] to save.
When to use this:
• Using the Race Log is the most thorough way to identify issues with the system.
Daktronics recommends that the Race Log is always turned on.
Results
The Results menu selects printouts by LANE or PLACE order.
The results printout format is used for verification and is
usually the preference of the meet management program
operator.
MENU-PRINTER
RSLTS BY: LANE *
From Main Menu – [4]>[5]>[2]
MENU-PRINTER
RSLTS BY: PLACE*
Use [←][→] to select LANE or PLACE and then press [ENTER] to save.
Backups
The Backups menu configures whether or not backup times
will be printed with the race results. Printing backup times is
usually the preference of the meet management program
operator.
MENU-PRINTER
BACKUPS: YES*
From Main Menu – [4]>[5]>[3]
MENU-PRINTER
BACKUPS: NO *
Use [←][→] to select YES (backups enabled) or NO (backups disabled) and then press
[ENTER] to save.
Splits
This menu configures whether or not split times will be printed
with the race results.
MENU-PRINTER
4-SPLITS: NONE *
From Main Menu – [4]>[5]>[4]
MENU-PRINTER
4-SPLITS: SUBTR* MENU-PRINTER
4-SPLITS: CUMUL*
Use [←][→] to select NONE , SUBTR (subtractive) or CUMUL (cumulative) split times and
then press [ENTER] to save.
MENU-SETUP
5-PRINTER
MENU-PRINTER
1-RACE LOG
From Main Menu – [4]>[5]
MENU-PRINTER
2-RESULTS
MENU-PRINTER
3-BACKUPS
MENU-PRINTER
4-SPLITS